姓名：罗云 | 职称：副教授/硕导 |
|
系属：化工装备与控制工程系 | 学历/学位：博士 | |
学科：动力工程及工程热物理 | 所学专业：化工过程机械 | |
电子邮箱：luoyun@upc.edu.cn | ||
联系电话：18266630657 | ||
地址邮编：山东省青岛市黄岛区长江西路66号，266580 | ||
个人主页：https://orcid.org/0000-0002-7263-0082 | ||
教育经历： 2009.09-2013.06，中国石油大学（华东），本科/学士 2013.09-2018.06，中国石油大学（华东），研究生/博士 工作经历： 2018.08-2019.08：中国石油大学（华东）化学工程学院，讲师 2019.09-2019.12：中国石油大学（华东）新能源学院，讲师 2018.08-2020.12：中国石油大学（华东）石油工程学院，石油与天然气工程博士后 2020.01至今：中国石油大学（华东）新能源学院，化工装备与控制工程系，副教授 学术兼职： 山东压力容器专业委员会秘书长/委员； 中国机械工程学会高级会员、中国力学学会会员、中国化工学会会员； Metals、Frontiers in Materials特刊客座编辑； International Journal of Metallurgy and Metal Physics 编委； International Journal of Materials Science and Applications编委； Mater Des、Int J Fatigue、Mater Sci Tech等16个国际期刊审稿人。 主讲课程： 过程设备设计，化工设备设计基础，化工设备安全 研究方向： （1）焊接残余应力计算、测试与调控； （2）高温蠕变损伤及寿命评价； （3）表面喷丸处理技术； （4）疲劳强度与断裂评定； （5）新能源装备（燃料电池、储氢气瓶）强度与寿命。 指导研究生： 2019届：姚彬 2020届：曾强、方毅、谢佳濛 2021届：谷文斌 2022届：张保柱 2023届：杨刚、董丕健、董佳欣 承担课题： 1.国家自然科学基金青年科学基金项目，51905545，高压水射流调控焊接残余应力机理与模型研究，结题； 2.国家重点研发计划项目子课题，2021YFB4001503，高效率低成本电堆工程化制造关键技术、装备及测评体系开发，主持； 3.国家自然科学基金联合基金重点支持项目，U21B2076，核电蒸汽发生器电磁感应局部热处理多场耦合调控残余应力方法研究，参与； 4.重质油国家重点实验室重点科研平台基金开放课题，20CX02219A，面向大型石化项目本质安全的超大压力器焊接原位调控机理研究，主持； 5.中国博士后科学基金面上项目，2018M642723，异种钢焊接接头高压水射流喷丸强化机理及蠕变寿命预测。 获奖情况： 1. 2021年中国核能行业协会科学技术奖三等奖； 2. 2019年度中国石油和化学工业联合会科技进步一等奖； 3. 2023国家级教学成果二等奖； 4. 第九届山东省教学成果奖（高等教育类）一等奖； 5. 第八届全国压力容器学术会议优秀青年论文奖三等奖； 6. 山东省优秀博士学位论文。 指导学生获奖： 过程装备与实践创新大赛一等奖； 第十五届中国大学生节能减排社会实践与科技竞赛三等奖； 第八届中国研究生能源装备创新设计大赛二等奖； 第八届山东省大学生科技创新大赛一等奖、第七届山东省大学生科技创新大赛二等奖； 山东省大学生课外学术科技作品竞赛特等奖。 学术著作： 胡效东, 罗云, 过程装备制造工艺与检测技术. 中国石化出版社. 2020.04 蒋文春，罗云，化工设备安全基础. 中国石化出版社. 2021.08 发表论文： 1.Yun Luo*, Wenchun Jiang*, Qiang Zeng. High accuracy and efficiency calculation model for predicting the reduction of residual stress on large pressure vessels by ultrasonic impact surface treatment. 2023. 2.Yixuan Zhang, Jiameng Xie, Yun Luo*. A Uniformed Calculation Criterion on Heat Band Width of Local PWHT on Welded Joint with Dissimilar Thickness. Metals 2023, 13(6), 1100 3.Yun Luo*, Jingyu Zang, Hongxiang Zheng. Flow Field and Gas Field Distribution of Non-Submerged Cavitation Water Jet Based on Dual-Nozzle with Concentric Configuration. Water 2023, 15(16), 2904 4.Luo Y*, Chen X, Liu R and Jiang W (2023), Effects of a cooling channel on the creep damage and failure probability of planar solid oxide fuel cells. Front. Mater. 10:1238559. 5.Xuqian Chen, Yun Luo*, Yunkai Chen, Liang Long. Failure analysis of overheated coil leakage in ethylene cracking furnace. Engineering Failure Analysis, 152 (2023) 107465. 6.Xiaodong Hu, Zhaoxu Li, Yun Luo*, Xiao Han, Zhe Zhang. Failure mechanism of temperature measuring tube in hydrogenated rosin methyl ester reaction kettle. Engineering Failure Analysis 150 (2023) 107303. 7.Hong-Xiang Zheng, Yun Luo*,Wenchun Jiang*, Jingyu Zang, Xuefang Xie, Zhilong Dong. Effects of cavitation jet peening treatment on the residual stress and fatigue properties of SAF2205 cruciform welded joints. Fatigue & Fracture of Engineering Materials & Structures. 2022, 45(12): 3731-3745. 8.Hong-Xiang Zheng, Yun Luo*, Jing-Yu Zang, Wen-Chun Jiang. Comparison of strengthening effect and fatigue properties of SAF2205 cruciform welded joints by ultrasonic impact and cavitation jet peening treatment. Materials Science and Engineering: A, 2022, 852: 143717 9.Yu Wang, Wenchun Jiang*, Yun Luo, Ming Song, Shan-Tung Tu. High temperature creep strength design and optimization of solid oxide fuel cell. International Journal of Hydrogen Energy, 2022, 47(50): 21450-21461 10.Yun Luo*, Qian Zhang, Hong-Xiang Zheng, Wenchun Jiang. Reducing Full-Field Residual Stress of Girth Weld With Thick Wall by Combining Local PWHT and Water Jet Peening. Journal of Pressure Vessel Technology, 2022, 144(6): 061302. 11.Wenchun Jiang*, Yun Luo, Yangguang Deng, Yu Wan, Jingkai Chen. Effect of Cooling Rate on Phase Transformation and Strain Response of SA508-3 Steel by Numerical and Experimental Study. Journal of Pressure Vessel Technology. 2022, 144(6): 061501. 12.Luo Yun*, Zheng Hong-Xiang, Jian Wenchun, Fang Yi, Zhao Xu. Improving Structure Integrity and Fatigue Properties of 316L Welded Joint by Water Jet Peening Treatment. Journal of Materials Engineering and Performance, 2023, 32, 664-679. 13.Qian Zhang, Kai Xie, Yun Luo*, Yu-Cai Zhang, Wen-Chun Jiang. Mismatch effect of material creep strength on creep damage and failure probability of planar solid oxide fuel cell. International Journal of Hydrogen Energy, 2022, 47(4): 2673-2684. 14.Zheng Hong-Xiang, Luo Yun*, Zhang Bao-Zhu, Jiang Wen-Chun, Tu, Shan-Tung. A new calculation formula to describe the dynamic pressure of water jet peening with elliptical nozzle for high-efficiency treatment. Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science. 2022;236(10):5238-5256. 15.Hong-Xiang Zheng, Yun Luo*, Jing-Yu Zang, Qian Zhang. Effect of nozzle outlet type on the flow field velocity and impact pressure of high pressure water jet peening. Journal of Fluids Engineering-Transactions of The ASME. July 2022, 144(7): 071201. 16.Qian Zhang, Kai Xie, Yun Luo*, Yu-Cai Zhang, Wen-Chun Jiang. Mismatch effect of material creep strength on creep damage and failure probability of planar solid oxide fuel cell. International Journal of Hydrogen Energy, 2021, 47(4): 2673-2684. 17.Zheng Hong-Xiang, Luo Yun*, Zhang Bao-Zhu, Jiang Wen-Chun, Tu, Shan-Tung. A new calculation formula to describe the dynamic pressure of water jet peening with elliptical nozzle for high-efficiency treatment. roceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science. 2022. 18.Hong-Xiang Zheng, Yun Luo*, Jing-Yu Zang, Qian Zhang. Effect of nozzle outlet type on the flow field velocity and impact pressure of high pressure water jet peening. Journal of Fluids Engineering-Transactions of The ASME. July 2022, 144(7): 071201. 19.Yun Luo*, Baozhu Zhang, Liang Long, Xingcai Li, Wei Liang, Hong-Xiang Zheng. Failure analysis of cracking in S30408 weld joint between cylinder and flange of pure steam sterilization pot. Engineering Failure Analysis, 2021, 129: 105684. 20.Yun Luo, Wenchun Jiang*, Zhongwei Yang, Chengcai Wang, Qiang Jin, Teng Gao, Guizhen Yan, Shan-Tung Tu, Yinbiao He. Using reinforce plate to control the residual stresses and deformation during local post-welding heat treatment for ultra-large pressure vessels. International Journal of Pressure Vessels and Piping, 2021, 191: 104332. 21.Guo-Qiang Xu, Yun Luo*, Bin Yao, Wenchun Jiang. Stresses measurement and failure prevention of on-line natural gas transmission pipelines for compressor station on collapsible loess area in northwest China. Engineering Failure Analysis, 2021,126: 105467 22.Qian Zhang, Baozhu Zhang, Yun Luo*, Gang Yang, Hong-Xiang Zheng. Effect of the Welding Process on Microstructure, Microhardness, and Residual Stresses of Capacitor Discharge Stud Welded Joint. ASME. J. Manuf. Sci. Eng. January 2022; 144(1): 011007. 23.蒋文春, 罗云*, 万娱, 金强, 张显程, 涂善东. 焊接残余应力计算、测试与调控的研究进展[J]. 机械工程学报, 2021, 57(16): 306-328. 24.Wenchun Jiang, Yun Luo, Qiang Zeng, Jinguang Wang, Shan-Tung Tu. Residual stresses evolution during strip clad welding, post welding heat treatment and repair welding for a large pressure vessel. International Journal of Pressure Vessels and Piping, 2020, 189: 104259. 25.Yun Luo, Wenchun Jiang*, Yu-cai Zhang, Bin Yang, Ming Song, Jinkai Chen. Effects of dual-cracks on the creep crack growth behaviour of HastelloyC276-BNi2 brazed joints, Materials at High Temperatures, 2020, 37:4: 230-242. 26.Yun Luo*, Wenbin Gu, Wei Peng, Qiang Jin, Qingliang Qin, Chunmei Yi. A Study on Microstructure, Residual Stresses and Stress Corrosion Cracking of RepairWelding on 304 Stainless Steel: Part I-Effects of Heat Input. Materials 2020, 13, 2416: 1-18. 27.Wenchun Jiang, Yun Luo*, Baozhu Zhang, S. H. Li, X. F. Xie, Shan-Tung Tu. Characterization of creep constraint effect for brazed joint specimens at crack tip by new constraint parameter As. Theoretical and Applied Fracture Mechanics, 2020, 109: 102707. 28.Xiaodong Hu, Hao-Yong Jiang, Yun Luo*, Qiang Jin, Wei Peng, Chun-Mei Yi. A Study on Microstructure, Residual Stresses and Stress Corrosion Cracking of Repair Welding on 304 Stainless Steel: Part II-Effects of Reinforcement Height. Materials 2020, 13, 2434: 1-19. 29.Fuwei Lv, Xiaodong Hu*, Chongbin Ma, Bin Yang, Yun Luo*. Failure analysis on cracking of backing plate of lifting lug for air preheater. Engineering Failure Analysis, 2020, 109: 104395. 30.Qian Zhang, Yun Luo*, Yanting Zhang. A study of effective elastic constants of glass-fibre reinforced thermoplastic pipes by theoretical method and simulation. International Journal of Pressure Vessels and Piping, 2019, 172: 100-106. 31.Yun Luo, Wenchun Jiang, Yu-cai Zhang, Fan Zhou, Shan-Tung Tu. A new damage evolution model to estimate the creep fracture behavior of brazed joint under multiaxial stress. International Journal of Mechanical Sciences, 2018, 149: 178-189. 32.Yun Luo, Qian Zhang, Wenchun Jiang, Yu-cai Zhang, Bin Yang, Shan-Tung Tu. A more appropriate FE model to predict the creep crack initiation and growth behavior of brazed joint. Engineering Fracture Mechanics, 2018, 204: 72-86. 33.Yun Luo, Wenchun Jiang, Yu Wan, Wanchuck Woo, Shan-Tung Tu. Effect of helix angle on residual stress in the spiral welded oil pipelines: Experimental and finite element modeling. International Journal of Pressure Vessels and Piping, 2018, 168: 233-245. 34.Yun Luo, Wenchun Jiang, Yucai Zhang, Muming Hao, Shan-Tung Tu. Creep rupture behavior of Hastelloy C276-BNi2 brazed joint. Materials Science and Engineering: A, 2018, 711: 223-232. 35.Yun Luo, Chuanlong Wang, Wenchun Jiang, Yu Wan, Weiya Zhang, Yu Wang. Effects of inner defects on creep damage and crack initiation for a brazed joint. High Temperature Materials and Processes. 2018, 37(9-10): 863–872. 36.Yun Luo, Wenchun Jiang, Dongfeng Chen, Robert C. Wimpory, Meijuan Li, Xiaolong Liu. Determination of Repair Weld Residual Stress in a Tube to Tube-Sheet Joint by Neutron Diffraction and the Finite Element Method. ASME J PVT. 2018, 140(2): 021404-021404-8. 37.罗云，楚学永，唐印，张庆旭. 吸附塔支撑圈结构焊接残余应力有限元分析. 热加工工艺，2018, 47(13): 239-242. 38.Yun Luo, Qian Zhang, Wenchun Jiang, Yucai Zhang, Muming Hao, Shan-Tung Tu. The microstructure, mechanical properties and fracture behavior of Hastelloy C276-BNi2 brazed joint. Materials and Design, 2017, 115: 458-466. 39.Wenchun Jiang, Yun Luo, Zhiquan Wei, Yucai Zhang, Yu Wang. Effect of tube radius on creep for an anode supported tubular solid oxide fuel cell: Experimental and finite element simulation. International Journal of Hydrogen Energy. 2017, 42(36): 23198-23206. (SCI二区, IF=3.582) 40.Wenchun Jiang, Yun Luo, Xiaolei Zhang, Qian Zhang, W.Y. Zhang. Effect of helix angle on hydrogen diffusion of spiral weld pipe. Journal of Engineering Materials and Technology. 2017; 140(1):011009. 41.Yun Luo, Qian Zhang, Wenchun Jiang, Weiya Zhang, Shugen Xu, Muming Hao. Creep failure prediction of brazing joints with double notches. Materials & Design, 2016, 100: 271-279. 42.Yun Luo, Wenchun Jiang, Qian Zhang, W.Y. Zhang, Muming Hao. Effects of anode porosity on thermal stress and failure probability of planar solid oxide fuel cell with bonded compliant seal. International Journal of Hydrogen Energy, 2016, 41(18): 7464-7474. 43.Yun Luo, Wenchun Jiang, Qian Zhang, Weiya Zhang, Wanchuck Woo, Shan-Tung Tu, Muming Hao. Effect of notch position on creep damage for brazed joint. Advances in Engineering Software, 2016, 100:72-81. 44.Yun Luo; Wenchun Jiang; Qian Zhang; Yu Wan; W. Y. Zhang; Y. J. Wang. Experimental and numerical study on the reduction of residual stress in the fillet weld by overlay welding and cutting method. ASME Journal of Pressure Vessel Technology. 2016; 138(6):061405. 45.Luo Yun, Zhang Xiaolei, Jiang Wenchun and Hao muming. Comparative study of weld residual stress on steel pipes with different weld types. China Welding, 2016, 25(4): 52-60. 46.Wenchun Jiang; Yun Luo; J. H. Li; Wanchuck Woo. Residual Stress Distribution in a Dissimilar Weld Joint by Experimental and Simulation Study. J. Pressure Vessel Technol. 2016; 139(1):011402. 47.魏志全, 罗云, 李海刚,等. 半管夹套焊接及焊后热处理的残余应力分析[J]. 焊接技术, 2016, 46(s1):99-101. 48.魏志全, 罗云, 王宜金,等. 钎焊工艺对点阵结构残余应力的影响规律研究[J]. 焊接技术, 2016(11):17-21. 49.Yun Luo, Wenchun Jiang, Weiya Zhang, Y.C. Zhang, W. Woo, S.T. Tu. Notch effect on creep damage for Hastelloy C276-BNi2 brazing joint. Materials & Design, 2015, 84:212-222. 50.罗云，蒋文春，杨滨，王炳英. 材料强化模型对回弹计算模拟精度的影响[J]. 机械强度, 2015，37(3): 551-555. 51.罗云，蒋文春, 姚延武，张志磊，马学孔, 韩继超. 板式换热器管板接头补焊残余应力数值模拟. 电焊机, 2015, 45(12): 78-82. 52.Wenchun Jiang, Yun Luo, Weiya Zhang, Wanchuck Woo, S.T. Tu. Effect of temperature fluctuation on creep and failure probability for planar solid oxide fuel cell. Journal of Electrochemical Energy Conversion and Storage 2015; 12(5):051004. 53.Jiang Wenchun, Luo Yun, Wang BingYing; Woo Wanchuck; Tu S.T. Neutron diffraction measurement and numerical simulation to study the effect of repair depth on residual stress in 316L stainless steel repair weld. Journal of Pressure Vessel Technology, 2015, 137(4):041406. 54.Wenchun Jiang, Yun Luo, Huai Wang,B.Y.Wang. Effect of impact pressure on reducing the weld residual stress by high pressure water jetting for 304 stainless steel clad plate. Journal of Pressure Vessel Technology, 2015; 137(3):031401. 55.罗云，蒋文春，王炳英. 接管内表面堆焊降低焊接接头残余应力研究[J]. 热加工工艺，2014, 43(23):178-181. 56.罗云，蒋文春，王怀等. 工艺参数对高压水射流降低焊接残余应力的影响[J]. 焊接技术，2014, 44(1):22-25. 57.罗云，蒋文春，王炳英. 套管修复焊接残余应力三维有限元模拟[J]. 热加工工艺，2014, 43(19): 186-189. 58.Wenchun Jiang, Yun Luo, B.Y. Wang, S.T. Tu, J.M. Gong. Residual stress reduction in the penetration nozzle weld joint by overlay welding. Materials & Design, 2014, 60:443-450. 59.罗云, 蒋文春. 高压水射流喷丸降低焊接残余应力有限元分析[J]. 压力容器, 2013, 30(11): 42-46. Wenchun Jiang, Yun Luo, Guodong Zhang, 60.Wanchuck Woo, S.T. Tu. Experimental to study the effect of multiple weld-repairs on microstructure, hardness and residual stress for a stainless steel clad plate. Materials & Design,2013, 51:1052-1059. 授权专利： 1.罗云;陈旭谦;蒋文春;宋明;张玉财;孟辉波;张秀成;张清贵;周帼彦. 电池堆综合性能评价多准则决策方法，202310712784.X 2.蒋文春; 金强;罗云;万娱;涂善东;王成才;杨中伟;任林昌. 超大型压力容器局部热处理加固建模及网格划分方法. 2019100958460 3.罗云; 蒋文春;郑红祥;王浦勋;臧靖宇;胡齐贤;翟向楠;秦祥朋;赵旭. 一种非淹没空化水射流喷嘴结构及强化装置与应用. 授权公告日：2023.06.30申请号：202210101178X 4.蒋文春; 郑红祥;罗云;臧靖宇;解学方;董志龙;王浦勋;翟向楠;王金光;赵旭. 一种用于十字焊接接头结构的空化水射流强化工艺. 授权公告日：2023.06.30申请号：2022105585035 5.蒋文春;郑红祥;罗云;张显程;涂善东. 一种基于焊接残余应力调控的高压水射流装置及使用方法. 授权公告号：CN112658998B, 授权公告日：2022.09.30, 申请号：2020114851599,申请日：2020.12.16 6.蒋文春; 罗云; 万娱; 金强; 彭伟; 王金光; 胡希海; 任林昌; 曹怀祥. 基于残余应力分布的焊接接头切割取样尺寸的确定方法.申请号：2020101985078授权日：2022.08.05 7.蒋文春; 金强;罗云;万娱;叶培举;涂善东;李福来. 一种超大型压力容器超长焊缝焊接残余应力与变形高效计算处理方法. 授权公告号：CN109766663B; 授权公告日：2022.12.30;申请号：2019100958352 8.蒋文春; 罗云;金强;谷文斌;解学方;李少华;沈溃领;赵旭;曹怀祥. 大型调质钢压力容器内壁补焊后局部热处理方法. 授权公告日：2022.06.07。申请号：ZL 2021103373973。 9.罗云，蒋文春，金强，杨滨，谷文斌，翟向楠，章泉志，宋明大. 大型压力容器T型接管焊缝局部热处理加热带布置方法. 专利号：ZL202010198494.4. 授权日期：2021.11.09 10.罗云，蒋文春，郑红祥，胡效东，杨滨，张玉财，宋明，周凡，陈建飞，任林昌. 用于降低全场焊接残余应力的高压水射流喷嘴及装置. 专利号：ZL202010210306.5. 授权日期：2021.11.05 11.罗云; 蒋文春; 张倩; 张玉财; 杨滨; 涂善东. 一种钎焊接头剪切蠕变性能测试装置及测试方法. 授权公告号：CN109100242B授权公告日：2020.12.25申请号：2018108549091申请日：2018.07.31 12.罗云; 蒋文春; 金强; 涂善东. 一种能够在制造现场测试焊接残余应力的方法. 授权公告号：CN109799020B授权公告日：2020.11.13申请号：2019101209483 13.罗云; 蒋文春; 涂善东; 杨中伟; 晏桂珍; 任林昌. 不等厚度接头局部焊后热处理温度场调控的装置和方法. 授权公告号：CN109880993B授权公告日：2020.09.15申请号：2019101236372 14.蒋文春; 罗云; 涂善东; 范志超. 超大结构的焊接残余应力及变形的集成计算方法.授权公告日：2020.08.28申请号：ZL2019101392046 15.罗云，蒋文春，张倩，王宜金，张伟亚，郝木明，巩建鸣，涂善东. 一种钎焊接头断裂韧性测试装置. 发明专利，专利号：201610063457.6，授权日期：2018.02.16 16.蒋文春，罗云，张伟亚，万娱，张倩，郝木明，涂善东. 一种降低焊接残余应力的压力容器接管与封头连接方法. 发明专利，已授权. 专利号：201610622933.3. 授权日期：2018.07.06 17.蒋文春, 罗云, 王炳英, 巩建鸣, 王怀. 一种利用高压水射流消除焊接残余应力的方法. 发明专利，专利号：201410070760.X，申请日期：2014.02.18，授权日期：2015.10.28 | ||
